SISCO FLOW CONTROL CO.,LTD
10147638

Online time(9:00-18:00)excluding the year-end holiday


Lugged Resilient Seated Butterfly Valve


image.png



COMPANY & PRODUCTS



      Butterfly Valve RBV020 Series

      SISCO RBV020 series are specially designed as the line of concentric resilient seated butterfly valve, suitable for DEAD END services.

      SISCO RBV020 series is designed to meet the stringent

      requirements of wide range of industries worldwide. There are two different exteriors while sharing the same general and design features.

    RBV020-C2 SERIES

      Lug type concent ric soft backup seat w ith groove and tongue designing, size from 2” 24” (DN50-600)


image.png   image.png

    RBV020-H SERIES

      Lug type concentric hard backup seat designing, size from  2" 24” (DN50-600)



FIELD OF APPLICATION



      Chemical 

      Beverage

      Brewing/Wine Making 

      Pharmaceutica I

      Food Processing

      Petroleum 

      Transportation

      Ultrapure 

      Water Marine

      Pulp & Paper 

      Mining 

      Power/FGD 

      Nuclear Power 

      Irrigation

      Water & Wastewater Treatment 

      Textile

      Desalination


DESIGN FEATURES



      Bi-directional bubble tight shut off, zero leakage.


      Full EPDM  lined  valve  interior isolating the Iine media from the body.

      

      Dry shaft feature isolating the line media from the shaft and therefore standard shaft           material can be used

      

      Smaller operating  torque.

     

      Light weight and volume lowering cost and achieving easy installation.

      

      Full bore feature results in higher  Cv value.


GENERAL  FEATURES


      Body

      One piece LUG style. Valve mounting top flanges meet ISO 5211 standard for direct mounting of manual operators and power actuators.

 

      Seat

      SISCO' s tongue and groove seat design lowers torque and provides complete isolation of flowing media from the body. The seat also features a molded 0-ring which eliminates the use of flange gaskets. The seat isolates the valve body and stem from

      line media and has been specifically designed to seal with slip-on or weld-neck  flanges.

 

      Disc

      High strength discs are casted by once, the sea ling edges are spherically machined then either hand polished or the entire disc is Nylon or Rubber coated to produce a bubble-tight shut off, minimum torque, and longer seat life. The symmetrical disc profile increases CV valves, reduces turbulence and increases pressure recovery.

     

      Shaft

      Alternative to high corrosion resistance shaft materials, RBV020 is equipped with the dry shaft design because of its concertric nature and axial sealing design where shaft with 

standard material is completely  isolated from the flowing  media.

      One shaft pin-less and double shafts pin-less design are available to be chosen depending on customers' preference. Precision machin- ing of the disc and the stem connection minimizes hysteresis  and   produces maximum strength  engagements.

      Al l stem designs  incorporate a  blow-out  proof feature.

      Both disc/stem designs inherently provide complete protection from particle  entrap- ment and bacterial decay, protection that is required for sanitary performance. For superior erosion and abrasion resistance, the one piece disc/stem is fully encased in either EPDM Or BUNA N.

      For double shafts pin-less design, precision double "D”or "Square” disc to stem connection drives the disc without the need for screws or pins. The close tolerance, double”D” 0r ”Square” connection that drives the valve disc are exclusive features of the SISCO valves. Disassembly of the shaft is just a matter of pulling the stem out of the disc.


      Shaft Bushing

      Non-corrosive, phenolic resin bushing absorbs actuator side thrust.

 

      Blow-out Proof

      A retaining ring, ir1stalled between the machined stem groove and gland retainer step, provides full retention of the stem in the unlikely event of internal stem failure.

 

      Primary & Secondary Seals

      These seals prevent line media from contacting with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat and the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the seat stem hole. Self-adjusting triple 0-ring sealing is also applied to give positive sealing in both directions and prevents external substances from entering the stem bore.

      Actuator Mounting

      Due to a modular concept of design, all SISCO actuators including Handles, Gear Operators, Pneumatic and Electric Actuators can be mounted directly to SISCO resilient seated valves. No brackets are required, which allows of simple installation in the field, minimize possible misalignment and reduces overall height.